|
|
Reciprocating grind. |
Creep-feed grinding |
|
Slot Grinding (Grinding Wheels with Calibrated Width)
Steel
- unhardened
Roughing
Finishing
- hardened
Roughing
Finishing
- in general
|
|
53A60 H15VPMF
28A80 H15VPMF
53A60 F15VPMF
53A80 F15VPMF
93A120F15VPMF601W |
Stainless steel, acid and heat resistant (gas turbine and aero space components)
(e.g. Nimonic, Inconel, Udimet) |
|
53A80 F15VPMF
57A60 H15VPH
93A80F15VPH604W |
Grinding Wheels Profiled with fixed Diamond Tool and/or CNC Dressing Disk
Steel
- unhardened
- hardened |
54A80 H8V904W
54A80H15VPMF904W
|
54A60F15VPH904W
53A80 F15VPMF
93A80F15VPMF601W |
Stainless steel, acid and heat resistant
(e.g. Nimonic, Inconel, Udimet) |
53A80 H15VPMF |
54A80H15VPH904W
54A80H15VPMF604W |
|
Grinding Wheels Profiled with Steel Crush Forming Rolls
Steel
- unhardened
Roughing
Finishing
- hardened
Roughing
Finishing
|
54A80 H8V904W
54A180 H8V904W
54A80 H8V904W
54A180 G8V904W |
54A60H15VPH904W
54A120H15VPH904W
54A60H15VPH904W
54A120H15VPH904W |
Stainless steel, acid and heat resistant
(e.g. Nimonic, Inconel, Udimet)
- roughing
- finishing |
54A80 H8V904W
54A180 G8V904W |
54A60H15VPH904W
53A120 F15VPMF |
| Cast alloys |
11CV60 H15VPMF |
11CV60 H15VPMF |
| Thread rolling dies and thread chasing tools |
|
|
pitch in mm
0.25 - 0.80
1.00 - 1.25
1.50 - 1.75
>= 2.00 |
min. radius (mm)
0.03
0.10
0.16
0.22 |
11C400/500 K4V
11C280/320 K3V
11C240 K3V
11C180 K3V |
11C500 F20VP
11C400 F20VP
11C320 G12VPS81
11C280 G12VPS77 |
Grinding Wheels Profiled with rotary Diamond Truers
Steel
- unhardened
- hardened |
54A60 H8V904W
53A60 H15VPMF |
54A46H15VPMF904W
54A80F15VPH904W
57A60 H15VPH
54A60H15VPH904W |
Stainless steel, acid and heat resistant
(e.g. Nimonic, Inconel, Udimet)
(large profile) |
53A120 F15VPMF
|
54A120F15VPH904W
29A60 L18VPHHGG | | |
